If you have been reading about Reversed-phase and want a single page that covers the useful parts, this is it: definitions, context, how it is studied, and the questions that come up repeatedly.
Last reviewed on 2026-01-14. Where a claim depends on a specific study, the study is described rather than over-claimed.
HPLC testing is not a single fixed procedure; it is a family of separation modes. Reversed-phase, normal-phase, ion-exchange, size-exclusion, and affinity chromatography each suit different analyte properties. Reversed-phase methods dominate because they handle many neutral and moderately polar compounds. Detection can be optical, electrochemical, or mass spectrometric, and the detector dictates what information is available. Coupling with mass spectrometry increases selectivity and enables identification when standards are unavailable. The technique cannot separate every mixture without adjustment.
HPLC testing is an analytical technique used to separate, identify, and quantify components in a liquid sample. It relies on a pressurized mobile phase that carries the sample through a column packed with stationary phase. Different compounds travel at different rates because of interactions with the stationary and mobile phases. The resulting signal versus time is a chromatogram. Peak position indicates identity under specified conditions, while peak area or height relates to amount.
Laboratories apply HPLC testing across pharmaceutical, food, environmental, and industrial chemistry. The method can measure active ingredients, impurities, additives, preservatives, and degradation products. Sample preparation often includes dilution, filtration, and sometimes extraction or derivatization. The choice of column, mobile phase, pH, temperature, and detector depends on the analytes and matrix. Results are compared with reference standards to assign identity and concentration. Method suitability is judged by resolution, precision, and accuracy.
Routine quality control monitors retention time shifts, baseline noise, system pressure, and peak shape. Trends can reveal column aging, mobile phase preparation errors, detector drift, or sample degradation. Corrective actions may include replacing the column, preparing fresh mobile phase, or recalibrating the detector. Stability testing often uses HPLC to measure parent compound loss and degradation product formation. Open questions remain about how accelerated stability results extrapolate to long-term storage under varied conditions.
Quality control for HPLC testing combines scheduled checks, documented procedures, and review of results. Before sample analysis, system suitability testing confirms that the instrument, column, and method meet predefined criteria. Common criteria include resolution between critical peaks, retention time precision, peak tailing, and theoretical plate count. Failure triggers investigation before results are reported. Records link raw data, calculations, instrument logs, and analyst identity to each batch, supporting audits and repeat analysis.
Method validation evaluates accuracy, precision, specificity, linearity, range, detection limit, quantitation limit, and robustness. Regulatory guidance for pharmaceuticals, foods, and environmental testing defines expected documentation and acceptance criteria. Verification confirms that a validated method works in a specific laboratory with its own instruments and reagents. Calibration curves use reference standards with known purity and traceability, while measurement uncertainty is estimated from validation data, control charts, and collaborative studies. The scope of validation depends on the method's intended use.
| Property | Value | Notes |
|---|---|---|
| Abbreviation | HPLC | Also called high-performance liquid chromatography |
| Separation mechanism | Differential partitioning | Compounds distribute between mobile and stationary phases |
| Typical column chemistry | C18 (octadecylsilane) | Used in reversed-phase separations |
| Typical detector | UV-Vis or photodiode array | Mass spectrometry is common for trace and confirmatory work |
| Typical particle size | 1.8–5 µm | Smaller particles require higher pressure and can improve speed |
Data handling and documentation are central to HPLC quality control. Electronic systems should have audit trails that record changes to methods, sequences, and results. Integration parameters, such as peak baseline and threshold, can affect reported areas and must be defined in advance. Out-of-specification results trigger a structured investigation that may include reanalysis, instrument checks, and review of sample preparation. Regulatory inspections often examine raw data, audit trails, and training records to verify that reported results are traceable and reliable.
Method validation establishes that an HPLC procedure is suitable for its intended use. Key parameters include accuracy, precision, specificity, linearity, range, limit of detection, limit of quantitation, and robustness. Accuracy measures agreement with a true or accepted value, while precision describes repeatability and intermediate precision. Specificity confirms that the method measures the analyte without interference from impurities, degradants, or excipients. Validation is documented in a protocol and report, and acceptance criteria are set before experiments begin. Regulatory guidance varies by region, but the general principles are widely harmonized.
System suitability testing is performed before and during analytical runs to confirm that the instrument and method are working as expected. Common checks include retention time, peak area, resolution between critical pairs, tailing factor, and theoretical plate count. Results are compared with predefined limits, and a failed check requires investigation before sample results are reported. Quality control samples at low, middle, and high concentrations are injected at intervals to monitor accuracy and precision. Blank injections detect carryover and contamination, while control charts track performance over time.
== Non-Christian stigmata == Among the Warao of the Orinoco Delta, a contemplator of tutelary spirits may mystically induce the development of "(imagined) openings in the palms of his hands". Bleeding wounds, described in Western sources as stigmata, are regularly indicated in Buddhist art. Some spiritualist mediums have also produced stigmata. During the séances of German medium Maria Vollhardt, it was alleged that bleeding wounds appeared. However, Albert Moll, a psychiatrist, considered her phenomena to be fraudulent.
Passing alpha particles through a very thin glass window and trapping them in a discharge tube allowed researchers to study the emission spectrum of the captured particles, and ultimately proved that alpha particles are helium nuclei. Other experiments showed beta radiation, resulting from decay and cathode rays, were high-speed electrons. Likewise, gamma radiation and X-rays were found to be high-energy electromagnetic radiation. The relationship between the types of decays also began to be examined: For example, gamma decay was almost always found to be associated with other types of decay, and occurred at about the same time, or afterwards. Gamma decay as a separate phenomenon, with its own half-life (now termed isomeric transition), was found in natural radioactivity to be a result of the gamma decay of excited metastable nuclear isomers, which were in turn created from other types of decay. Although alpha, beta, and gamma radiations were most commonly found, other types of emission were eventually discovered. Shortly after the discovery of the positron in cosmic ray products, it was realized that the same process that operates in classical beta decay can also produce positrons (positron emission), along with neutrinos (classical beta decay produces antineutrinos).
== Method == Classically, to perform a radioimmunoassay, a known quantity of an antigen is made radioactive, frequently by labeling it with gamma-radioactive isotopes of iodine, such as 125-I, or tritium attached to tyrosine. This radiolabeled antigen is then mixed with a known amount of antibody for that antigen, and as a result, the two specifically bind to one another. Then, a sample of serum from a patient containing an unknown quantity of that same antigen is added. This causes the unlabeled (or "cold") antigen from the serum to compete with the radiolabeled antigen ("hot") for antibody binding sites. As the concentration of "cold" antigen is increased, more of it binds to the antibody, displacing the radiolabeled variant, and reducing the ratio of antibody-bound radiolabeled antigen to free radiolabeled antigen. The bound antigens are then separated and the radioactivity of the free(unbound) antigen remaining in the supernatant is measured using a gamma counter. This value is then compared to a standardised calibration curve to work out the concentration of the unlabelled antigen in the patient serum sample. This method can be used for any biological molecule in principle and is not restricted to serum antigens, nor is it required to use the indirect method of measuring the free antigen instead of directly measuring the captured antigen.
=== Procedures === There are five major Microtox tests including the Basic Test, the 100% Test, the Solid Phase Test, the Comparison Test, and the Inhibition Test. Of these five tests, three are used for sediment and soil testing including the Basic Test, the 100% Test and the Solid-Phase Test. All of these versions follow the same general method of reconstituting the Allivibrio fischeri reagent in the Reconstitution Solution. Corrections are made for salinity and particulate matter, then the bacteria are exposed to the sample solution depending on the methods of the particular test. The light output of the bacteria is measured using a photometer after five and 15 minutes from exposing the bacteria to the samples. The light measured directly correlates to the toxicity of the sample, producing data that allows for the calculation of EC50 or IC50s, or other ECxx and ICxx values. Acute Toxicity Basic Test is a procedure that measures the relative acute toxicity of a sample. This test is the best protocol for testing samples of unknown toxicity, a high level of toxicity, or when the test results are required to provide the highest confidence and precision. This test consists of two controls and eight sample dilutions in duplicate. Acute Toxicity 100% Test is a procedure that tests the sample at 100% sample concentration and as a result includes adding reagent solution directly to the sample. This test is used for samples that are expected to have a low level of toxicity and is generally used as an environmental screening tool.
== Welfare implications == Beak trimming can cause acute stress, and possibly chronic pain following the trimming. A bird's ability to consume food is impaired following beak trimming because of the new beak shape and pain. Most studies report reduced body weights and feed intake following beak trimming; however, by sexual maturity or peak egg production, growth rates are usually normal. Weight losses were reduced in chicks that were beak trimmed by infrared compared with chicks trimmed by a hot-blade. Pain caused by beak trimming depends on the age it is performed, the method of trimming and the length of beak that is removed. Beak trimming in the poultry industry usually occurs without anaesthetic at 1-day of age or when the chicks are very young, but can occur at a later age if an outbreak of feather pecking occurs, and in some cases, birds may be beak trimmed on repeated occasions. Beak trimming is not permitted in the UK on meat chickens that are aged over 10 days.
Sources: en.wikipedia.org
For example, in the figure showing trypanothione reductase from the human protozoan parasite Trypanosoma cruzi, two molecules of an inhibitor called quinacrine mustard are bound in its active site. The top molecule is bound reversibly, but the lower one is bound covalently as it has reacted with an amino acid residue through its nitrogen mustard group.
In 1973, the borough increased in size when the West Rouge area, formerly within the Township of Pickering, was transferred to it with the creation of the Regional Municipality of Durham. The borough's status was changed to city in 1983. The number of aldermen was increased to 14 and the term of office extended to three years from two.
The Kingdom of Hanover maintained an army after the Napoleonic Wars. In 1832, King William IV of Hanover and the United Kingdom issued his troops with British Army uniforms, but they differed slightly from their original British versions. When the personal union with the United Kingdom ended in 1837, and Ernst August ascended to the crown of Hanover, he replaced their uniforms with Prussian Army-style ones, which included the pickelhaube spiked helmet for his Guard Corps. By 1866 they wore a more Austrian style of uniform, with only the guard corps keeping the Prussian one. During the Austro-Prussian War, the Hanoverian Army fought and defeated the Prussians during its march south towards Austria, at the Battle of Langensalza. However, it was later surrounded and forced to surrender to Prussia.
Thionyl chloride is a component of lithium–thionyl chloride batteries, where it acts as both the electrolyte and the positive electrode (in batteries: cathode) with lithium forming the negative electrode (anode). The overall discharge reaction is as follows:
=== Ribosomal diseases and cancer === Ribosomopathies are congenital human disorders resulting from defects in ribosomal protein or rRNA genes, or other genes whose products are implicated in ribosome biogenesis. Examples include X-linked Dyskeratosis congenita (X-DC), Diamond–Blackfan anemia, Treacher Collins syndrome (TCS) and Shwachman–Bodian–Diamond syndrome (SBDS). SBDS is caused by mutations in the SBDS protein that affects its ability to couple GTP hydrolysis by the GTPase EFL1 to the release of eIF6 from the 60S subunit.
Sources: en.wikipedia.org
=== Breakup of Rodinia and formation of the Iapetus Ocean === After the Grenville orogeny, the direction of the continental drift reversed, and the single supercontinent Rodinia began to break up. The mountains formed during the Grenvillian era underwent erosion due to weathering, glaciation, and other natural processes, resulting in the leveling of the landscape. The eroded sediments from these mountains contributed to the formation of sedimentary basins and valleys. For example, in what is now the southern United States, the Ococee Basin was formed. Seawater filled the basin. Rivers from the surrounding countryside carried clay, silt, sand, and gravel to the basin, much as rivers today carry sediment from the midcontinent region to the Gulf of Mexico. The sediment spread out in layers on the basin floor. The basin continued to subside, and over a long period of time, probably millions of years, a great thickness of sediment accumulated. Eventually, the tectonic forces pulling the two continents apart became so strong that an ocean formed off the eastern coast of the Laurentian margin. This was called the Iapetus Ocean and was the precursor of the modern Atlantic Ocean. The rocks of the Valley and Ridge province formed over millions of years, in the Iapetus. Shells and other hard parts of ancient marine plants and animals accumulated to form limey deposits that later became limestone. This is the same process by which limestone forms in modern oceans.
=== Glycerol intoxication === Excessive consumption by children can lead to glycerol intoxication. Symptoms of intoxication include hypoglycemia, nausea, and a loss of consciousness. While intoxication as a result of excessive glycerol consumption is rare and its symptoms generally mild, occasional reports of hospitalization have occurred. In the United Kingdom in August 2023, manufacturers of syrup used in slush ice drinks were advised to reduce the amount of glycerol in their formulations by the Food Standards Agency to reduce the risk of intoxication. A 2025 study reported that between 2018 and 2024, at least 21 children aged 2–7 in the UK and Ireland received emergency treatment for symptoms of glycerol intoxication following the consumption of slush ice drinks. Food Standards Scotland advises that slush ice drinks containing glycerol should not be given to children under the age of 4, owing to the risk of intoxication. It also recommends that businesses do not use free refill offers for the drinks in venues where children under the age of 10 are likely to consume them, and that products should be appropriately labelled to inform consumers of the presence of glycerol.
== Electronic integration == Integration of microfluidic platforms and electronic components have the potential to generate micro total analysis systems (μTAS), which are devices that include and automate all essential steps for sample preparation and analysis. Paper electronics rely on functional structures like conductors to be fabricated on the surface of paper, but paper-based microfluidics rely on channels and barriers to be fabricated inside the substrate. This incompatibility led to a majority of μTAS being developed using external electrodes contacted with the paper channels. However, in 2009, screen-printed electrodes were integrated into a paper-based microfluidic device to create a biosensor for glucose, lactate, and uric acid. This first report of electronic integration for paper-based microfluidics illustrated how this can improve the design of μTAS at a low cost. Since then, a variety of electrode fabrication techniques have been developed, including screen printing, inkjet printing, metal sputter deposition, pencil drawing, laser-induced pyrolysis and external electrodes to create a network of conductive traces.
Later, Osborn and Weber pioneered fluorescent antibody staining of cellular substructures, a major technique called indirect immunofluorescence microscopy. In developing the method, they tagged microtubules with specific antibodies, then used fluorescently-tagged secondary antibodies (antibodies to the first set of antibodies) to light up the locations of the microtubules in cells. When they began their work in Germany, the cytoskeleton was not heavily researched. Microtubules and microfilaments were known, and they established that microtubules always reacted with antibodies to tubulins while microfilaments always reacted with antibodies to actin. In the course of their studies, they also found intermediate filaments, slightly thicker than microfilaments, and unreactive to actin antibodies. They developed new antibodies against proteins of the microtubules, intermediate filaments, and microfilaments to use as reagents in examining many types of cells. Many of their antibodies have been licensed to companies for commercial development. Klaus and Osborn used their method to study elements of the cytoskeleton of eukaryotic cells in two dimensions and three dimensions. Osborn has extensively studied microtubules, intermediate filaments, microfilaments, and nuclear proteins as well as other proteins that can associate with these structures. By 1981 Osborn and Klaus had shown conclusively intermediate filaments in different types of cells are different but related, and they can be distinguished using immunofluorescence.
=== Commission on Streamlining Government === Kennedy served as a member of the Commission on Streamlining Government, which worked to reduce bureaucracy in Louisiana. In 2009, he urged the commission to consolidate the state's four boards of higher education into one. Kennedy argued that the state needed to cut spending, rather than raise taxes, because it already had the nation's fifth-highest business taxes. He urged the commission to cut the number of state government employees, which he said could save $800,000 per year. Kennedy also recommended that the commission review all state consulting contracts to ensure the state was getting a good deal. Kennedy suggested limiting Medicaid patients to two nonemergency room visits per year as a cost-saving measure. He also called for the state to require that all prisoners receive a high school diploma to reduce recidivism. Kennedy often criticized the commission as "way too tentative” in its policy proposals.
Sources: en.wikipedia.org
It measures the presence and amount of one or more compounds in a liquid sample. Separation occurs in a column, and detection produces a signal proportional to concentration. Identification usually requires comparison with a known reference standard under the same conditions.
In most cases the sample is consumed or altered during analysis, though some detectors are non-destructive. Fractions can be collected after separation for further study. Repeated testing therefore requires additional sample.
Run times range from under a minute for fast methods to over an hour for complex separations. Sample preparation, equilibration, and data review add time. Throughput depends on instrument configuration and method requirements.
System suitability is typically performed before each batch or according to the validated method and laboratory procedure. Some long runs include periodic checks during analysis. The required frequency depends on regulatory expectations and method performance.