reversed-phase raises a handful of sensible questions. This page answers them in order, starting with the fundamentals and moving to applications.
This page was last updated on 2025-09-13 and is reviewed periodically as new material appears.
Reversed-phase chromatography dominates modern HPLC testing, using a nonpolar stationary phase such as chemically bonded octadecyl groups and a polar mobile phase of water mixed with organic solvent. Analytes partition between the mobile and stationary phases according to hydrophobicity. Gradient elution changes the mobile phase composition over time to separate compounds with a wide range of retention. Isocratic elution keeps the composition constant and is simpler for routine assays. Column temperature, pH, and flow rate influence selectivity, peak shape, and retention time, so these parameters are controlled during a validated method.
Detection in HPLC testing commonly relies on ultraviolet-visible absorbance, fluorescence, refractive index, or mass spectrometry. A diode array detector records full spectra across a wavelength range, which helps identify co-eluting peaks. Mass spectrometry provides mass-to-charge ratios and can confirm molecular identity at low concentrations. The choice of detector depends on analyte structure, required sensitivity, and whether quantitation or identification is the goal. No single detector works for every compound, and method development often compares responses before selecting one.
High-performance liquid chromatography is an analytical technique that separates components of a liquid sample by passing it through a packed column under pressure. A pump delivers a mobile phase at a controlled flow rate, and an injector introduces the sample into the stream. Differences in interaction with the stationary phase cause analytes to migrate at different rates. Detectors record elution as peaks, and a data system converts signals into a chromatogram. The method is suited to compounds that dissolve in a liquid and are not volatile enough for gas chromatography.
Detection commonly uses ultraviolet-visible absorbance, fluorescence, refractive index, or mass spectrometry. Ultraviolet detection depends on molecular chromophores that absorb light at specific wavelengths. Mass spectrometry provides mass information and sensitive quantification, often after electrospray ionization. Before sample batches, performance checks examine resolution, elution time repeatability, peak symmetry, and plate count. Matrix effects and co-elution remain recognized uncertainties; formal validation studies and orthogonal detection help address them. Detector choice depends on analyte properties and required sensitivity.
High-performance liquid chromatography, or HPLC, separates dissolved compounds by passing a liquid mobile phase through a packed column. Components distribute differently between the stationary phase and the moving liquid, so they travel at different speeds and exit at different times. A detector records these eluting bands as peaks, and peak area or height relates to amount. The technique supports testing in pharmaceuticals, foods, environmental samples, and industrial chemicals. Quantification usually depends on calibration with known standards.
Several separation modes exist, including reversed-phase, normal-phase, ion-exchange, size-exclusion, and hydrophilic interaction liquid chromatography. Reversed-phase uses a nonpolar stationary phase with a polar mobile phase and is widely applied to small organic molecules. Gradient elution changes mobile phase composition during the run, while isocratic elution keeps it constant. Column chemistry, particle size, temperature, flow rate, and mobile phase pH all influence retention and resolution. Method development selects conditions that separate analytes from matrix components and from each other.
| Property | Value | Notes |
|---|---|---|
| Separation mode | Reversed-phase | Most common for neutral and moderately polar analytes |
| Column particle size | 3–5 µm | Smaller particles improve resolution but raise backpressure |
| Mobile phase pH range | 2–8 | Silica-based columns may degrade outside this range |
| Typical flow rate | 1.0–2.0 mL/min | For analytical columns with 4.6 mm internal diameter |
| Common synonyms | HPLC, LC, high-pressure liquid chromatography | High-performance liquid chromatography is the standard expansion |
Validation demonstrates that a method is suitable for its intended use. Typical performance characteristics include accuracy, precision, specificity, linearity, range, limit of detection, limit of quantitation, and robustness. Regulators and standards organizations provide frameworks, but specific requirements depend on the application and jurisdiction. System suitability tests are run before sample analysis to confirm resolution, peak symmetry, retention time repeatability, and sensitivity. A validated method is not permanently fixed; changes may require partial or full revalidation.
Routine HPLC testing depends on controlled reagents, calibrated instruments, and documented procedures. Columns degrade over time, so retention times and peak shapes are monitored for drift. Mobile phases are filtered and degassed to prevent pump damage and detector noise. Reference standards must be traceable and stored under suitable conditions. Data handling systems record injections, calculations, and audit trails. Quality control samples interspersed with unknowns help detect errors during a run.
Functional Genomics Data (FGED) Society Formerly known by the abbreviation MGED. An organization that works with others "to develop standards for biological research data quality, annotation and exchange" as well as software tools that facilitate their use.
Normally, cytokine production in and around the wounded area increases to fight infection and control healing (and, possibly, to control pain), but pre-incisional morphine administration (0.1 mg/kg to 10.0 mg/kg) reduced the number of cytokines found around the wound in a dose-dependent manner. The authors suggest that morphine administration in the acute post-injury period may reduce resistance to infection and may impair the healing of the wound.
In China, archaeological evidence of medicine in Chinese dates back to the Bronze Age Shang dynasty, based on seeds for herbalism and tools presumed to have been used for surgery. The Huangdi Neijing, the progenitor of Chinese medicine, is a medical text written beginning in the 2nd century BCE and compiled in the 3rd century. In India, the oldest known surgical text, the Sushruta Samhita written by the surgeon Sushruta, described numerous surgical operations, including the earliest forms of plastic surgery as well as methods of sterilization for surgical instruments. The earliest records of dedicated hospitals come from Mihintale in Sri Lanka where evidence of dedicated medicinal treatment facilities for patients are found.
Dextromethorphan (the stereoisomer of levomethorphan, a semi-synthetic opioid agonist) and its metabolite dextrorphan have no opioid analgesic effect at all despite their structural similarity to other opioids; instead they are potent NMDA antagonists and sigma 1 and 2-receptor agonists and are used in many over-the-counter cough suppressants. Salvinorin A is a selective, powerful ĸ-opioid receptor agonist. It is not considered an opioid nevertheless, because:
== Chemistry == Selegiline is a substituted phenethylamine and amphetamine derivative. It is also known as (R)-(–)-N,α-dimethyl-N-(2-propynyl)phenethylamine, (R)-(–)-N-methyl-N-2-propynylamphetamine, or N-propargyl-L-methamphetamine. Selegiline (L-deprenyl) is the enantiopure levorotatory enantiomer of the racemic mixture deprenyl, whereas D-deprenyl is the dextrorotatory enantiomer. Selegiline is a derivative of levomethamphetamine (L-methamphetamine), the levorotatory enantiomer of the psychostimulant and sympathomimetic agent methamphetamine (N-methylamphetamine), with a propargyl group attached to the nitrogen atom of the molecule. Selegiline is a small-molecule compound, with the molecular formula C13H17N and a low molecular weight of 187.281 g/mol. It has high lipophilicity, with an experimental log P of 2.7 and predicted log P values of 2.9 to 3.1. Pharmaceutically, selegiline is used almost always as the hydrochloride salt, though the free base form has also been used. At room temperature, selegiline hydrochloride is a white to near white crystalline powder. Selegiline hydrochloride is freely soluble in water, chloroform, and methanol.
Sources: en.wikipedia.org
=== January === 2 January – The Japan Meteorological Agency (JMA) publishes its JRA-55 dataset, confirming 2023 as the warmest year on record globally, at 1.43 °C (2.57 °F) above the 1850–1900 baseline. This is 0.14 °C (0.25 °F) above the previous record set in 2016. 3 January – The first functional semiconductor made from graphene is created. 4 January – A review indicates digital rectal examination (DRE) is an outdated routine medical practice, with a lower cancer detection rate compared to prostate-specific antigen (PSA) testing and no benefit from combining DRE and PSA. 5 January Scientists report that newborn galaxies in the very early universe were "banana"-shaped, much to the surprise of researchers. An analysis of sugar-sweetened beverage (SSB) taxes concludes scaling them could yield substantial public health benefits. 9 January Scientists report studies that seem to support the hypothesis that life may have begun in a shallow lake rather than otherwise – perhaps somewhat like a "warm little pond" originally proposed by Charles Darwin. A group of scientists from around the globe have charted paradigm-shifting restorative pathways to mitigate the worst effects of climate change and biodiversity loss with a strong emphasis on environmental sustainability, human wellbeing and reducing social and economic inequality. Researchers have discovered a new phase of matter, named a "light-matter hybrid", which may reshape understanding of how light interacts with matter.
Insecticides are pesticides used to kill insects. They include ovicides and larvicides used against insect eggs and larvae, respectively. The major use of insecticides is in agriculture, but they are also used in home and garden settings, industrial buildings, for vector control, and control of insect parasites of animals and humans. Acaricides, which kill mites and ticks, are not strictly insecticides, but are usually classified together with insecticides. Some insecticides (including common bug sprays) are effective against other non-insect arthropods as well, such as scorpions, spiders, etc. Insecticides are distinct from insect repellents, which repel but do not kill.
In turn, these conditions of hypoxia and hypercapnia will trigger additional effects on the body such as Cheyne–Stokes respiration. Some people with sleep apnea are unaware that they have the condition. In many cases, it is first observed by a family member. An in-lab sleep study overnight is the preferred method for diagnosing sleep apnea. In the case of OSA, the outcome that determines disease severity and guides the treatment plan is the apnea-hypopnea index (AHI). This measurement is calculated from totaling all pauses in breathing and periods of shallow breathing lasting greater than 10 seconds and dividing the sum by total hours of recorded sleep. In contrast, for CSA the degree of respiratory effort, measured by esophageal pressure or displacement of the thoracic or abdominal cavity, is an important distinguishing factor between OSA and CSA. A systemic disorder, sleep apnea is associated with a wide array of effects, including increased risk of car crashes, hypertension, cardiovascular disease, myocardial infarction, stroke, atrial fibrillation, insulin resistance, kidney disease, memory loss, neurodegeneration, low testosterone, and higher incidence of cancer. Further research is being conducted on the potential of using biomarkers to understand which chronic diseases are associated with sleep apnea on an individual basis. Treatment may include lifestyle changes, mouthpieces, breathing devices, and surgery. Effective lifestyle changes may include avoiding alcohol, losing weight, quitting smoking, and sleeping on one's side.
=== After birth === At birth, the baby's lungs are filled with fluid secreted by the lungs and are not inflated. After birth the infant's central nervous system reacts to the sudden change in temperature and environment. This triggers the first breath, within about ten seconds after delivery. Before birth, the lungs are filled with fetal lung fluid. After the first breath, the fluid is quickly absorbed into the body or exhaled. The resistance in the lung's blood vessels decreases giving an increased surface area for gas exchange, and the lungs begin to breathe spontaneously. This accompanies other changes which result in an increased amount of blood entering the lung tissues. At birth, the lungs are very undeveloped with only around one sixth of the alveoli of the adult lung present. The alveoli continue to form into early adulthood, and their ability to form when necessary is seen in the regeneration of the lung. Alveolar septa have a double capillary network instead of the single network of the developed lung. Only after the maturation of the capillary network can the lung enter a normal phase of growth. Following the early growth in numbers of alveoli there is another stage of the alveoli being enlarged.
Sources: en.wikipedia.org
== Extraction == After finishing the digestion the peptides generated in this process have to be extracted from the gel matrix. This is accomplished by one or several extraction steps. The gel particles are incubated with an extraction solution and the supernatant is collected. In the first extraction, almost all of the peptide is recovered, the repetition of the extraction step can increase the yield of the whole process by only 5-10%. To meet the requirements of peptides with different physical and chemical properties an iterative extraction with basic or acidic solutions is performed. For the extraction of acidic peptides a solution similar to the concentration and composition of the digestion buffer is used; basic peptides are extracted in dependence to the intended mass spectrometric method with a low concentrated acidic solution of formic acid for ESI and trifluoroacetic acid for MALDI respectively. Studies on model proteins showed a recovery of approximately 70–80% of the expected peptide yield by extraction from the gel. Many protocols contain an additional fraction of acetonitrile to the extraction solution which, in concentrations above 30% (v/v), is effective in reducing the adsorption of peptides to the surface of reaction tubes and pipette tips. The liquid of the pooled extracts is evaporated in a centrifugal evaporator. If the volatile salt ammonium bicarbonate was used for the basic extraction, it is partially removed in the drying process. The dried peptides can be stored at -20 °C for at least six months.
=== Hematopoietic stem cell transplant === Bronchiolitis obliterans affects up to 5.5% of people who have received HSCT. One of the biggest risk factors after HSCT is the development of GVHD with a 14% risk. Other risk factors post transplant including tobacco use, age of donor, age of recipient, lower baseline FEV1/FVC ratio, non-caucasian race, peripheral and lower circulating IgG levels. Studies have, however, shown mixed results regarding these other risk factors. There has been an association shown between the increased use of peripheral stem cells and the risk of developing bronchiolitis obliterans. Also, research has shown an increased risk for developing the disease within the first year of transplant if the person is infected with respiratory syncytial virus or parainfluenza virus within the first 100 days post transplant.
=== Mechanism of action === Rupatadine is a second generation, non-sedating, long-acting histamine antagonist with selective peripheral H1 receptor antagonist activity. It further blocks the receptors of the platelet-activating factor (PAF) according to in vitro and in vivo studies. Rupatadine possesses anti-allergic properties such as the inhibition of the degranulation of mast cells induced by immunological and non-immunological stimuli, and inhibition of the release of cytokines, particularly of the tumor necrosis factors (TNF) in human mast cells and monocytes.
=== Second formation === The division was reconstituted starting in March 1945 and placed under the operational control of the 2nd Army (Army Group Vistula) in West Prussia. On 10 March 1945, the division was reformed near Schwedt with only two regiments. The "Shadow Division Hannover" was utilized for this purpose. Grenadier Regiment 1093 was not re-established, and the artillery regiment consisted of only a single battalion. Subsequently, the division was assigned to the 3rd Panzer Army and deployed on the Oder front against the Red Army. In May 1945, the 547th Volksgrenadier Division surrendered to US forces near Schwerin in Mecklenburg.
People sometimes think that I and the others worked on penicillin because we were interested in suffering humanity. I don't think it ever crossed our minds about suffering humanity. This was an interesting scientific exercise, and because it was of some use in medicine is very gratifying, but this was not the reason that we started working on it. Florey approached the MRC for funding in September 1939, shortly after the outbreak of the Second World War, and Mellanby authorised the project, allocating £250 (equivalent to £14,128 in 2025) to launch the project, with £300 for salaries and £100 for expenses per annum for three years. Florey felt that more would be required. On 1 November 1939, Henry M. "Dusty" Miller, Jr, from the Natural Sciences Division of the Rockefeller Foundation dropped by to discuss funding Heatley's position. Heatley had fallen out with Chain, and had accepted a new position at the Carlsberg Laboratory in Copenhagen on a Rockefeller Fellowship, but due to the outbreak of the Second World War, he had decided to remain at Oxford. Miller arranged for Heatley to retain his fellowship. Instead of working for Chain, Heatley would report directly to Florey as his personal research assistant.
Sources: en.wikipedia.org
HPLC testing separates and quantifies components in a liquid sample. It is used to check identity, purity, concentration, or stability. The technique works best for compounds that dissolve and are not easily vaporized.
The pump maintains a steady flow rate and pressure, which keeps retention times reproducible. Pulsation or flow errors can shift peaks and distort quantitation. Modern pumps use feedback control to reduce these variations.
HPLC alone usually separates compounds but does not always identify them. Retention time matching with a known standard provides tentative identification. Coupling HPLC to mass spectrometry adds mass information that supports structural identification.
HPLC separates and quantifies compounds in a liquid sample. Detectors produce a response proportional to the amount of a compound passing through the flow cell. Identification by retention time requires comparison with a known standard.